Do you want to set up solar power for a shed? Then, you have to follow specific procedures to fix the solar power for shed in the correct manner. Solar power shed is a new innovative way to save electricity and produce the current in a DIY method.
You have to understand how to fix the solar power for shed correctly in your home. However, some simple steps with homemade tools can make things easier and more effective for preparing the best solar power for creating your shed.
Now you have made up your mind to fix the solar power on your shed, but you need tools. So first, you have to make arrangements for the right set of tools and materials for installing the solar panel.
Materials Required For Solar Power For Shed
You will need specific materials to install the solar power shed in your home. Let’s find out the essential tools for fixing the solar power shed. Some of them are as follows:-
- 12 V 7Ah SLA Battery.
- 20W 12 V solar panel.
- Renogy Wanderer Solar Charge Controller.
- 12 V Strip lights LED.
- 5 amp Fuse X2.
- Fuse Block.
- 14 gauze wire connectors.
- Heat Shrinking Tubing.
- DC extension cord.
- Wood Screws.
These are some of the tools you will require while fixing the solar power for the shed. Do not miscalculate when installing the solar power for the shed, as it can cost you dearly.
Essential Steps You Have To Follow For Setting Up Solar Power For Shed
1. Mount All The Tools
The first step is to mount all the tools on the solar power shed. Then, you have to fix all the tools mentioned above on the ground of the window and outside the shed wall. Finally, you have to build a DIY wall for your solar panel.
After this, you have to fix the battery charge controller and shed it off the wall with the wood screws. Fix the LED light strips in the right proportion so that the connection provides maximum lights.
You have to attach the cable clips in the correct measurement to avoid the chances of the lights getting carried away through the cross beams.
2. Prepare The LED Strip Lights
You just need to cut the wall outlet, and you have to use the DC power source to fix the adapter. Then, you can attach some terminal connectors.
Cut the wall adapters and strip the ends of the wires. Next, you have to heat shrink some of the positive wires for your future use.
Proper stripping of the LED lights is crucial for setting the terminal connectors on your fuse block. You have to fix the block properly to get things done in the best possible ways.
3. Make Connection With Battery & Solar Charge Controller
You have to make the connection with the battery and solar charge controller. For that, you need to light up or turn on the controller. Then, you have to connect the solar panel to the solar charge controller.
The charge controller must indicate that the panel is connected correctly. You can program the charge controller to get fixed in the correct order.
You have to make the connection lines with the charger correctly. Then, you can seek a reference from the controller manual to make the program work properly.
4. Make Connection Of The Lights With The Battery
You have to connect positive and negative wires of the negative-positive terminals of the fuse block. Then, you have to insert the correctly sized fuse into the fuse block holder. After that, you have to close the fuse wiring once the solar power system is connected with the fuse.
You have to attach the connection in the correct sequence to make things work in your favor. So do not waste the wiring system in the wrong way. Instead, try to make the proper sequence of the wires so that you can make the connection in the right way.
You can seek the help of the manual to channel the solar connection in your home in the correct sequence. Do not make things more complicated for yourself.
5. Test The Solar Shed Lights
You can test the solar shed lights as it is the last step you must follow to turn the switch on. Do not make your choices in the wrong direction while you have to test the lights which you have fixed things in the correct sequence.
You have to make sure that you do not make your testing casually. You must not make your choices in such a way that can create problems in your way. Instead, develop a plan that can make things work in your favor in the best possible manner.
Read More About: Solar Street Light: Thinks You Must Know Before Purchasing It
How Can You Channelize The System?
The best way to adapt to installing solar power for a shed is explained as follows. First, you just need to follow the sequence to perfect the installation process. Then, try to adapt to the situation correctly to achieve your goals in the best ways.
- Arrange the lights in the correct sequence.
- You can make use of the lead-acid battery to keep the cost low.
- Arrange the solar panel in such a way that in the nighttime also it can generate electricity.
- Make the correct connection with the solar charge controller to make the installation process perfect.
- You can seek the help of an expert if you find things difficult at the time of installation.
Final Take Away
Hence, if you want to install solar power for shed, then you have to remember the mentioned process to get the things done in the right sequence. Then, you can seek the help of the manual book to make things occur as per your wish.
Do not make the wrong set of arrangements which can make things difficult for you in all possible aspects. The more accurate you are in your approach, the better will be the installation process. So try to avoid mistakes as far as possible.