How To Make Home Made Solar Light For Home?

Solar 7 Mins Read IstanaGreenWorld Oct 28, 2021
solar light for home

Making a solar light for home is a fun project for youngsters. It is simple to practice at home or in the classroom and gives students a thorough grasp of how solar energy is used. The solar light may also be handy for illuminating certain portions of the home without increasing the utility cost. 

Solar lights for houses must be utilized in areas that receive direct sunshine during the day. However, please remember that this light may not always be adequate and should not be solely dependent on. However, we have a step-by-step guideline here that will help you make a solar light for home in no time. 

How To Make Solar Light For Home?

If you successfully make a solar light for home, you must use it in outdoor areas such as your backyard or garden. Primarily people who are looking for some outdoor lighting in their landscape look for homemade ways to make solar lamps for home. So, let’s look at the steps of making indoor solar lights. 

Step 1: Buy The Products

When making anything at home, you require various gadgets and equipment to give it a professional finish. You do not need raw materials as factories or industries do. You can’t manufacture everything from scratch. As a result, purchasing required items such as spare parts and installation kits is the best option. 

Try to amass a collection of items from a  reputed brand. It will guarantee high quality, maintenance, and warranty. You can rely on the product to provide long-term service. Never compromise with the product’s quality. It is essential to choose high-quality items at reasonable pricing too. 

Step 2: Trim The Wires

Wiring is the most important aspect of building a solar light for home. A single error can ruin the electronics and components of the light. Choose the wire and make sure it is perfectly sized. Remember that the cable will deliver power to the light, so make no mistakes at this stage.

Before joining the wire, it must be neatly trimmed. A precise trimming will allow you to install the cable in the correct slot. Cutting is also necessary for perfectly connecting distinct edges.

Furthermore, you should be aware of the cable’s length from one end to the other. A short circuit can occur if an improper cable is used. It will shorten the cable’s lifespan.

Step 3: Connect The Light To The Circuit Board

If you’re going to create a solar light for home, you’ll need several pieces of equipment. A circuit board is the electrical device’s heart. Solar light circuit boards maintain contact between the wire, battery, and light. You must correctly attach the light to the circuit board. 

The light will be powered by the board via the connection you have previously inserted. Before you finish, check the voltage to make sure you’ve connected it correctly. Check the connected ports and hubs as well to ensure safe functioning.

Step 4: Connect The Circuit Board To Battery Holder

You can’t power the solar lights for homes directly by solar cells. Instead, the circuit must be connected to the battery. A battery charger will direct electricity from the solar panel to the battery. You can buy some solar panel kits at any store. A circuit board will convert this electricity into light. 

You must comprehend the input and output voltages while connecting the circuit to the battery. Then, depending on the type of connection, you must consider cable length, thickness, and an inverter. It takes only a few minutes to complete the task, and the technological labor is the same as attaching electrical lights to light holders.

Step 5: Drill The Lid

You can’t make solar led lights for home if you don’t know how to drill a lid. Set the circuit board down and grab the jar lid. Make a hole in the jar’s cover, and don’t ever set it on a surface that may damage it. 

Make sure that your fingers are not too close together when drilling since you might injure yourself. The hole you drill must be in the middle of the lid in order, so the solar panel remains sturdy enough. The drilling is also essential if you want the black and red wires to fit properly.

Step 6: Connect Solar Panel To The Circuit Board

Once you’ve placed the solar panel outside where sunshine is accessible, it’s now time to connect the solar panel to the circuit board. The solar panel will collect energy from the sun and deliver it to the batteries. The solar circuit board manages and produces electricity from the solar cell to the circuit board.

It’s really easy, and the system will create and supply electricity to the lights automatically. Before putting the solar panel in the sun, double-check all of the connections. Solar panels and circuit boards collaborate to power the light. Maintain a secure environment to make sure your solar lights outdoor work properly.

Step 7: Glue All Parts

You’ve already gathered all of the necessary components and installed them correctly to make your solar light for your home. So, now just put them together and use long-lasting glue to secure all of the pieces. You can use any waterproof adhesive that is appropriate for plastic attachment. 

All of the pieces must be held together by a strong glue. If you have a layout that can be fastened using screws, you may use those too. However, applying glue and screws together will result in a solid connection. Both of these are recommended if you want long-lasting outdoor lights solar.

Step 8: Install The Switcher

You may have complete control of the light by switching between the solar light and the battery. It will also assist you in saving power. Special solar switches that function well with both DC and AC output are required for solar garden lights. Unfortunately, a high-voltage switch is incompatible with solar panels and lighting.

Choose a well-known brand to ensure the switch’s warranty, longevity, and connection. When putting the switch with the solar light, try to maintain it in a readily accessible location. You may also install a switch with two energy modes; one for the bright light and one for the dim light. It will help you get the perfect solar light for your home in no time.

Step 9: Select A Location

You now have fully functional solar landscape lighting in your hands. You may now enjoy stronger light even when the power goes off. In addition, you can light up your home without using the power grid. As a result, you should choose the finest location for putting the light.

You may have chosen the location while making the solar light for the home from scratch. Keep your light in place while you add the installation frame and screws with exact measurements. It is preferable to put them away from where they will spend most of their time. Once it is ready, you’ll receive a lot of brightness for regular use.

Step 10: Test The Solar Light

You should test the performance of any electrical gadget, especially solar electricity. To begin, it is critical to examine the solar panel’s energy output rate. You can’t operate the solar light at home and expect it to be perfectly brilliant if you don’t have enough electricity. Low voltage will produce less light than the solar panel’s efficiency. 

When the solar panels produce enough energy, the battery will give you the correct output for the light. But, first, examine the battery’s performance. If everything goes as planned, you should have enough electricity to run the solar lights for the yard.

How To Maintain A Solar Light In Home?

  1. You must change your solar light batteries every three months because that will ensure optimum performance. 
  2. You should always keep the solar light clean to give you a bright and illuminating ray when you need it. You can use a soft cloth and soapy water to clean the solar lights.
  3. To make sure your solar light for home is fully functional, you should always prevent it from dirt and dust. You can use a soft-bristled brush to wipe off the debris and do it early in the day.
  4. In monsoon, make sure the solar yard lights are not placed in a damp area to bring molds. Also, it will make the solar light not work, so choose the location for your solar light according to the weather. 


Whether you make a solar light for home or solar lights for gardens, this is the most straightforward and reliable process you can follow. But, if you have some other questions regarding the making of solar lights, you can check the FAQ section.

1: How Much Does Solar Lights Cost?

Ans: If you don’t want to make a solar light for your home, you can always buy one because it doesn’t cost much. Amazon solar lights indoor cost approx $5-$20, and the price doesn’t vary much even if you choose to buy it from some other stores. 

2: Do Solar Lights Work Indoors?

Ans: A solar light for the home will work equally efficiently indoors and outdoor if it gets the right amount of solar energy. Just make sure the room is dark enough when you put the solar light there. But, even the best solar lights for home won’t last much longer indoors as they won’t receive any charge. You can use a solar battery backup system if you want to use it indoors. 

3: Are Solar Outdoor Lights Worth It?

Ans: Compared to traditional lights, solar street lights are always worth the money because they are more eco-friendly and pocket-friendly. They don’t even require much time or effort for maintenance. Also, you won’t need the LED fixtures to replace very often, so that’s another plus of it. 


Making a solar light for home is easy if you follow these steps thoroughly. We have not only included the steps of creating a solar light for house here, but also we have provided suggestions to maintain the light. If you want to know more about solar lights and how they are beneficial to us, you can let us know in the comment box. 

Read Also:

Leave A Comment

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.